BMW 440i (F32 / F33 / F36) ECU tune

Fits 2016–2020 · Stage 1 and Stage 2 · Mail-in

$1,899

Front view of a silver BMW 440i (F32) in a parking garage

Stage 1

435hp

445lb-ft

From 320 hp / 330 lb-ft stock

Stage
Horsepower+115 hp
320 hp factory435 hp tuned
Torque+115 lb-ft
330 lb-ft factory445 lb-ft tuned

Tuned figures are estimates; results vary.

Add-ons
  • You ship: your ECU, with your printed order confirmation
  • Turnaround: two business days from when your ECU arrives
  • Return shipping: paid by us

The car

About the BMW 440i (F32 / F33 / F36)

The 4 Series split from the 3 Series in 2014 to carry its two-door and fastback models, and the 440i is the six-cylinder version of that first generation: the F32 coupe, the F33 convertible with its folding hardtop, and the F36 Gran Coupe, a four-door hatchback with a coupe roofline.

The 440i name arrived for the 2017 model year, when the B58 inline-six replaced the engine of the 435i. Only the coupe could be ordered with the six-speed manual, with rear-wheel drive or xDrive; the convertible and Gran Coupe used the eight-speed Steptronic Sport, and all three offered xDrive.

Quoted 0–60 mph times run from 4.6 seconds for the 440i xDrive coupe with the automatic to 5.1 for the convertible. The 4 Series was facelifted for 2018, and for 2020 it received darker taillights and a gloss-black kidney frame.

Stage 1 is calibrated for the car as it left the factory and takes it from 320 hp and 330 lb-ft to 435 hp and 445 lb-ft on pump-grade fuel. Stage 2 is calibrated for supporting bolt-on modifications and high-octane fuel, for 460 hp and 475 lb-ft. The gearbox has its own controller and torque limits, so the optional TCU tune raises them to match, with sharper shifts and stronger clutch clamping.

More about BMW tuning

Figures & prices

BMW 440i (F32 / F33 / F36) tune figures by year

Factory and tuned horsepower and torque from our catalog, with prices for each stage and add-on.

Model yearFactoryStage 1Stage 2Add-ons
2016–2020320 hp / 330 lb-ft435 hp / 445 lb-ft
$1,899
460 hp / 475 lb-ft
$1,899
TCU tune $1,999

Tuned figures are estimates, not guarantees. Actual results vary with the car’s condition and modifications, fuel quality and octane, temperature, altitude and the dyno used. See our Terms of Service.

How it works

Mail-in tuning, start to finish

  1. 01

    Order online

    Choose your year, stage and add-ons and check out securely.

  2. 02

    Ship your ECU

    Pack it with your printed order confirmation email and send it to our Phoenix shop.

  3. 03

    We calibrate it

    Within two business days of it arriving.

  4. 04

    We ship it back

    Return shipping is on us. Reinstall and drive.

How mail-in tuning worksECU shipping instructions

FAQ

440i (F32 / F33 / F36) tuning questions

More answers in our FAQ

Which years of the 440i (F32 / F33 / F36) does this tune fit?

Our online catalog lists Stage 1 and Stage 2 tunes for 2016–2020 BMW 440i (F32 / F33 / F36) models. Choose your year at the top of the page; the figures and prices are the same for every year.

Does this page cover the 435i?

The 435i was the six-cylinder 4 Series for 2014 to 2016, with an earlier engine, and the 440i replaced it for 2017. The catalog starts this page at 2016, a year when US cars were still badged 435i, so check the badge and contact us before ordering if your car is a 435i.

How does the 440i differ from the M440i?

The M440i (G22 / G23 / G26) is the next generation, from 2021, with an uprated six, a 48-volt mild-hybrid system and a much larger grille, and it is automatic-only. The F32 440i coupe could still be ordered with a manual, and the F33 convertible has a folding metal roof.

What is the difference between Stage 1 and Stage 2 on the 440i (F32 / F33 / F36)?

Stage 1 is calibrated for the car as it left the factory and runs on pump-grade fuel. Stage 2 pairs the calibration with supporting bolt-on modifications such as downpipes and runs on high-octane fuel. On a 2020 car, Stage 1 takes it from 320 hp to 435 hp. Stage 2 takes it to 460 hp.

Do I need a TCU tune for the 440i (F32 / F33 / F36)?

A TCU tune is available as an add-on ($1,999). It raises the transmission’s torque limits and sharpens the shifts so the gearbox can handle the extra power. Ship your TCU in the same box as your ECU.

More BMW tunes

Other BMW models we tune

All BMW tuning

Contact

Talk to our tuning shop

Customers across the US order online and mail us their ECU. Our shop is at 952 W Melinda Ln, Suite D in north Phoenix (Deer Valley, 85027), and local owners are welcome to bring their car in. Call, visit or send us an inquiry.

HOURS Mon - Fri: 8AM - 5PM
Sat & Sun: Closed

Send an inquiry