Plus Plus Calibration delivers precision McLaren ECU tuning for owners anywhere in the US. From the M838T twin-turbo V8 in the 570S and 600LT through the M840T in the 720S, 765LT and 750S, and into the Artura’s twin-turbo V6 hybrid, our shop calibrations are developed and verified in-house on our dyno. Stage 1 and Stage 2 tunes for every McLaren from the MP4-12C to the Senna can also be ordered online.

A short history of McLaren performance

McLaren’s road cars grew out of its Formula 1 team. The McLaren F1 of the 1990s set the benchmark for its era, and McLaren Automotive’s first production car, the MP4-12C, arrived in 2011 with a 3.8-liter twin-turbo V8 and a seven-speed dual-clutch gearbox.

That engine family went on to power the 540C, 570S and 600LT; the 720S of 2017 enlarged it to 4.0 liters, and the 765LT and 750S developed it further. The Senna, built as a road-legal track car, uses the same twin-turbo V8 architecture. Every one of them is turbocharged, which is why McLarens respond so well to ECU and transmission calibration.

Senna
Driver's seat
Tap the speaker on either clip to hear it.

McLaren platforms we tune

Our McLaren calibration work covers the Sports Series, Super Series and Ultimate Series:

  • MP4-12C — M838T 3.8-liter twin-turbo V8, the original McLaren Automotive road car.
  • 540C, 570S, 570GT and 600LT — M838T 3.8-liter twin-turbo V8 (Sports Series).
  • 720S and 720S Spider — M840T 4.0-liter twin-turbo V8. A strong tuning platform with substantial headroom.
  • 765LT and 765LT Spider — a more aggressive version of the M840T with higher baseline output.
  • 750S and 750S Spider — the evolution of the 720S with updated internals.
  • GT — M840TE twin-turbo V8 grand tourer.
  • Artura — M630 3.0-liter twin-turbo V6 plug-in hybrid. A new platform with developing support.
  • Senna and Senna GTR — heavily modified M840T; specialist calibration work.
  • P1 and P1 GTR — hybrid hypercar with highly limited calibration scope.
White, black and matte grey McLaren supercars parked side by side outside the shop
Three McLarens, ready for pick-up.

720S Stage 1 ECU tune

The 720S is arguably the strongest tuning platform McLaren has built. The M840T 4.0-liter twin-turbo V8 ships with substantial reserve headroom, and low and mid-range torque improvements are especially dramatic: the factory calibration limits torque in lower gears for tire preservation, and raising those limits transforms the car’s drivability.

In our online catalog, a 2023 720S goes from 720 hp to 850 hp at Stage 1. In our shop, a Stage 1 tune is a single-day appointment.

Blue McLaren 720S seen head-on from above, parked outside the shop
A McLaren 720S.

720S Stage 2 with bolt-ons

Stage 2 on the 720S pairs our ECU calibration with high-flow downpipes and a cold-air intake, and the platform has proven exceptionally robust at these power levels on stock turbochargers. Our catalog lists the same 720S at 920 hp at Stage 2. The seven-speed dual-clutch transmission handles this when paired with the appropriate TCU calibration, which we do in our shop.

Front three-quarter view of an orange McLaren 720S parked outside the shop
A 720S at our shop.

765LT and 750S tuning

The 765LT ships from McLaren with a more aggressive factory calibration than the 720S, which means smaller Stage 1 ECU gains than the 720S, which starts from a less optimized map. Stage 2 gains remain substantial because the underlying hardware is identical. The 750S sits between the 720S and 765LT in factory output, and its Stage 1 gains fall proportionally.

Our catalog lists a 2023 765LT at 870 hp at Stage 1 and 955 hp at Stage 2, from 755 hp stock.

Sports Series: 570S, 600LT and 570GT

The M838T in the Sports Series cars is an older, slightly smaller-displacement sibling of the M840T. The 600LT responds especially well to calibration: it ships with a more aggressive factory tune than the 570S, but the platform is still well below its mechanical limits. Our catalog lists a 2021 600LT at 765 hp at Stage 2, from 592 hp stock.

MP4-12C tuning

The MP4-12C (2011–2014) is the car that put McLaren back into the road-car business, and it uses the M838T 3.8-liter twin-turbo V8 in its original form. As an older calibration platform with simpler torque-management logic than the later Sports Series and 720S, it responds well to ECU work at both Stage 1 and Stage 2 with high-flow downpipes.

McLaren TCU calibration

McLaren’s seven-speed SSG dual-clutch transmission is strong but ships with conservative clutch clamping pressures. In our shop, our TCU calibration increases clutch pressures to eliminate slip under boost, tightens shift timing, adjusts kick-down thresholds and raises the torque ceiling to match Stage 2 power levels. Without a TCU tune, aggressive ECU work on the 720S and 765LT can cause the transmission to pull timing under boost to protect the driveline.

Artura V6 hybrid tuning

The Artura’s M630 twin-turbo V6 and electric motor are a new platform for McLaren, and our calibration support is actively developing. Our Artura work focuses on engine calibration while respecting the hybrid system’s torque-distribution logic. Contact us for current capabilities — we’re conservative about releasing production tunes on brand-new hybrid architectures.

What McLaren owners get in our shop

Every McLaren we tune in our shop leaves with baseline and tuned dyno sheets, a full data log of every dyno pull capturing lambda, boost, knock and exhaust gas temperature, a written changelog of every calibration change, and road-drive verification for drivability. Most Stage 1 tunes are completed in a single day, and for out-of-town owners — many travel from California, Texas, Florida and Colorado — we coordinate lodging in north Phoenix’s Deer Valley area.

A McLaren Senna in our shop.